This job is no longer available.
You can view related vacancies or set-up an email alert notification when similar jobs are added to the website using the buttons below.

Fabricator Welder

£10.50 - £13 per hour
< JOB LISTING

Fabricator Welder Needed - Immediate start!
PERMANENT ROLE!
Based in Mansfield
Up to £13.00 Per hour based on experience
Day shifts - overtime opportunities available
A busy and growing company
 
Our established client is seeking a Fabricator Welder to join their growing organisation in Mansfield to enrol various skilled levels of candidates to start in a permanent position. This may Involve MIG welding and fabricating heavy gauge steel, working from JIGs and engineering drawings.
If the following skillsets apply to you then we would love to hear from you:
 

  • Skilled Fabricator
  • Confident in MIG welding
  • Competent with a wide variety of heavy gauge steel
  • Ideally familiar with Lobster back bends, shoots and cones
  • Confident reading technical drawings
  • Hard working and committed to completing tasks
 
Our client is one of the few leading steel manufacturers based in Mansfield Nottingham who are currently within a high rate of expansion and are limited placements available so early applicants will be considered sooner for the role. If the above appeals to your commitments and work ethic, then apply today. Alternatively send your CV to rjobling@encore-engineering.co.uk or call Reece at Encore on 0115 959 6938.

< JOB LISTING
APPLY NOW
SAVE SHARE
Get notifications for similar jobs

This job has now been filled but you may be interested in:

 

Electronics PCB Assembly

SAVE
£8.91 per hour

Electronics PCB Assembly
Nottingham
Days Shifts
£8.91 per hour
 
Electronics PCB Electronics Assemblers required for leading company based in Nottingham. As an Electronics PCB  Assembler you will be involved in the manufacturing process for a specified sub assembly, product or system.
 
The role will involve assembling a range of component parts, and performing the associated soldering, assembly, testing and inspection processes in a defined sequence from manufacturing documentation to achieve quality and productivity targets.
 
Capability to use a variety of hand tools, power tools or machines and equipment
Experience with PCB's
Electronics experience essential
Ability to work well within a team environment
Dexterous and good attention to detail
Soldering experience is highly desired within this role
Be familiar with, and work to health and safety requirements
 
 
£8.91 per hour Overtime. The company offers on-site parking and a great working environment and utilises the latest state of the art equipment.
 
Leading Electronic Manufacturing Services Company based in Nottingham. The company is a supplier and service solution provider to various industry markets.
 
To apply please click below. Alternatively call Mollie at ENCORE on 0115 959 6938 or send a copy of your CV to mgibbs@encore-engineering.co.uk.

Responsible Welding Co-Ordinator

SAVE
£30000 - £40000 per annum

Responsible Welding Co-Ordinator
Up to £40,000 per annum
Mansfield
Day Shift
PERMANENT ROLE

 
Responsible Welding Co-Ordinator required for a fabrication and welding company based in the Mansfield area. Acting as Senior Inspector & RWC you will be responsible for all welding related activities on contracts along with inspecting  welds & fabrication to ensure company complies with the ISO regulations.
 
The ideal candidate will meet the following requirements:
Senior Welding Inspector
Ideally be Apprentice trained in Fabrication
Confident fabricating products from scratch
Can read and work from engineering drawings
Supervisory experience
 
Responsibilities include but are not limited to:
Responsible for ensuring all of the welds meet the accredited standards & dimensions
Calibration of equipment & tools
Completion & implementation of welding procedures and processes
Managing the inspection team
Completing all paperwork and QA reports
Responsible for training and development
Assisting in appraisals
Adhering to site health and safety regulations
 
Essential Qualifications:
RWC - BCSA Qualification (minimum)
Magnetic Partical Inspection - PCN Level 2 or equivalent
Valid CSCS card
Supervisors Health & Safety qualification
Recognised fabrication qualification
 
The Package:
Permanent Role
Up to £40,000 per annum
On site parking
Overtime paid at a premium
 
If you have the above experience and are available immediately please apply below. Alternatively please send your CV to mgibbs@encore-engineering.co.uk or call the team on 0115 959 6938.

CNC Operator

SAVE
£9.50 - £10 per hour

CNC Operator
Up to £10 per hour plus shift allowance
NIGHT SHIFTS
Nottingham
Permanent Role
 
CNC Operator required to join an Aerospace company in Nottingham. This vacancy requires a CNC operator with experience on CNC Lathes using FANUC controls. Must be able to operate and run the machinery whilst changing tool offsets.
 
The Candidate:
Experience operating & running CNC Lathes machines
Confident using FANUC controls
Twin spindle, multi axis machine experience would be advantageous
Ideally have precision experience previously
Must have experience using measuring tools including verniers and callipers
Able to measure in both imperial and metric
Can read and work from engineering drawings
 
The Company:
This company offers a clean working environment and opportunities to progress upwards within the company. It is easily accessible from all major routes.
 
The Package
Up to £10 per hour plus shift allowance
Overtime is paid at a premium after 39 hours worked
£15 clock in allowance for each 12 hour shift worked
Monday - Thursday NIGHT SHIFTS
4pm - 4am
Training and career progression provided
Permanent Role
IMMEDIATE START AVAILABLE
 
If you are interested in this role please apply now! Alternatively call Mollie at ENCORE or send a copy of your CV to mgibbs@encore-engineering.co.uk

Site Joiner

SAVE
£15 - £19 per hour

Site Joiner
Up to £19 per hour
Nottingham Based
Long term position
 
We are currently recruiting for a reputable construction company that builds domestic extensions and loft conversions in the Nottinghamshire area.
 
Looking for an experienced joiner that can cover a wide range of work from building a roof to fitting a kitchen.
 
You will often be the senior person on-site and will be expected to set a professional example about quality of work, time keeping and customer liaison.
 
 
Monday - Friday 7:00am - 3:30pm
All work local to Nottingham
Valid driving license
Must have own Transport & Tools
No CSCS Card required
 
£15ph PAYE or £19ph LTD Pay Rate
Temporary to Permanent position
 
 
If you are interested in this role then apply now! Alternatively call Kanan at ENCORE on 0115 959 6938 or send a copy of your CV to kscotney@encore-engineering.co.uk.
­­­­­­­­­­­­­­­

Machinist

SAVE
£13.50 - £15.93 per hour

Machinist
£13.50 - £15.93 per hour
Nottingham
NIGHT SHIFTS
4 on 4 off shifts
 
Machinist required for an established engineering company in the Nottingham area. Machinist will have experience working in a heavy steel or construction industry and be confident to run large machinery and use hand and power tools. Extrusion machinery experience would be very advantageous for this role.
 
The ideal candidate will meet the following:
Experience within a construction or heavy steel industry
Confident running large machinery
Ideally have experience working on extrusion machinery
Experience with hand and power tools
Ability to work from job lists and measure right amount of materials
Following strict health and safety rules
Available immediately
 
The Package:
Immediate start available
Ongoing work
NIGHT SHIFTS only
4 on 4 off shift pattern
Up to £15.93 per hour
Overtime available
On site parking
 
If this sounds like the role for you please apply now. Alternatively call Mollie at ENCORE on 0115 959 6938 or send your CV to mgibbs@encore-engineering.co.uk.

Facilities Maintenance Technician

SAVE
£12 - £15 per annum

1x Handy Man / Facilities Maintenance
 
Must have a background in the building trade
Must Have Valid CSCS Card
Must Have Full UK Driving License
Will be traveling to various pubs around Nottinghamshire & will be carrying out Minor Repairs and building maintenance works
Different Tasks Everyday (Reactive Maintenance ) Anything from painting to basic plumbing or groundworks could be involved
Should have own basic tools.
Van Provided or fuel allowance given depending on situation
 
Contracted Hours - 40 hours
 
Mon - Fri 7:30 - 16:00
 
Hourly Rate - £12.00 (PAYE)   £15.00 (Umbrella)
 
Temp to Perm. Right Candidate will be taken on permanent after 16 weeks

Manual Machinist

SAVE
£11 - £12 per hour, Benefits: Full OR Part time hours available

Manual Machinist
Up to £12 per hour
Mansfield
Full time OR Part time hours
Permanent position       
 
Manual miller required for an established engineering company in Mansfield. Our client can be flexible for the right candidate & offer either full or part time hours for this role between their Monday - Friday opening hours.
 
The ideal candidate will have the following experience:
Experienced Manual Miller
Confident working from engineering drawings
Competent with medium to heavy gauge materials
Experience producing bespoke one-offs as well as batch work
Ideally worked within a variety of industries
Previously worked to tight tolerances
 
The Package:
Up to £12 per hour
Full time OR Part time hours available
Day shifts
Overtime available paid at a premium
Permanent position
On-site parking
 
If you are interested in this role then apply now! Alternatively you can call Mollie at Encore on 0115 9596938 or email a CV to mgibbs@encore-engineering.co.uk

Crane Operator

SAVE
£10 - £12 per hour

Overhead crane Operator
Up to £12ph
Days
Derbyshire
 
Overhead Crane Operator required for a growing company based in Derbyshire. Crane Operator will be responsible for setting and operating the crane ensuring health and safety procedures are followed at all times. When crane is not in use you will be expected to assist engineers on shop floor with general duties such as drilling, sawing, tapping and grinding.
 
The candidate will ideally meet the following:
Experienced overhead crane operator
Ideally have a crane license
Worked within a manufacturing industry
Confident with use of hand and power tools
Forklift license is advantageous
 
Overtime paid at a premium
On site parking
Temporary to permanent opportunity
Immediate start available

CNC Miller

SAVE
£12 - £13 per hour

CNC Miller
Up to £13 per hour
Day shifts
Mansfield
PERMANENT ROLE
 
CNC Milling machinist required for an engineering company based in Mansfield. Setting, operating and editing using Siemens controls. Manufacturing and producing tooling using medium to heavy steel.
 
The ideal candidate will pass the following criteria
Experienced CNC Miller
Ability to set, operate and edit programmes 
XYZ experience would be beneficial
Must be fluent in Siemens controls
Experience within hydraulics industry would be advantageous
Confident with medium to heavy materials especially steel
Must hold relevant qualifications
Ideally have an apprenticeship and be time served
 
The Package:
Monday to Friday day shifts
Permanent Position
Immediate start available
Overtime available
Free on-site parking
Looking to pay anything up to £13 per hour for the right candidate
 
If you are interested in this role please apply now! Alternatively call the team on 0115 959 6938 or send a copy of your CV to mgibbs@encore-engineering.co.uk.o.uk

Plater Welder

SAVE
£11 - £13.50 per hour

Plater Welder
Up to £13.50 per hour
Nottingham
Day shifts
Long term opportunity
 
Plater Welder required for a specialist engineering company in Nottingham. The job will involve using fabrication machinery to manufacture produce from scratch. Basic MIG and TIG welding using stainless steel on plate ranging from 3mm to 12mm thick.
 
The ideal candidate will pass the following criteria
Experienced Plater Welder
Confident with fabrication machinery such as guillotines and press brakes
Ability to Tack weld using MIG process
Must be able to fabricate from scratch
Experience working with stainless steel
Ability to read and work from technical drawings
 
Day shifts Monday - Friday
On-site parking
Immediate start
Long term opportunity
 
This is a fantastic opportunity to join a rapidly growing business working for a specialist engineering company. The product range is diverse and innovative, allowing you an opportunity to work in a progressively evolving industry that recognises and rewards success.
 
If this sounds like the role for you please apply below. Alternatively you can send your CV to mgibbs@encore-engineering.co.uk or call Mollie at ENCORE on 0115 959 6938.

Fabricator Welder

SAVE
£11 - £12 per hour

Fabricator Welder
Up to £12.00 per hour
Sutton-In-Ashfield
Immediate Start
 
Our client in Sutton-In-Ashfield is looking for a skilled Fabricator Welder to join their team on a long term basis. Must be confident with MIG welding as well as being able to fabricate thin gauge steel from start to finish.
 
The ideal candidate will meet the following criteria:
Skilled Fabricator
Sheet metal industry background
MIG Welding
TIG Welding would be a bonus
Be confident fabricating from scratch
Able to work from drawings
Confident using fabrication machinery
Apprentice trained or relevant qualifications would be advantageous
 
The Package:
Long term opportunity
Up to £12.00 per hour
Overtime available
Day shifts
 
If you are interested, please apply below. Alternatively send an up to date copy of your CV to mgibbs@encore-engineering.co.uk or Call Mollie at ENCORE on 0115 959 6938.

Plater

SAVE
£12.50 - £15 per hour

Plater
Up to £15 per hour
Days OR Night shifts
Mansfield
 
Platers required for a leading structural fabrication company in the Mansfield area. Plater will be working from engineering drawings and be confident to fabricate from scratch.
 
Ideally Apprentice trained Plater
Experienced Fabricator
Be able to fabricate from scratch using high end technical drawings
Competent in fabrication including cutting and profiling
Confident MIG Welder
Previous experience using press, punch, grinders and saws is essential
Experience of working on Structural steel
 
Up to £15 per hour
Overtime paid at a premium
Long term role
Days OR Night Shifts
IMMEDIATE START AVAILABLE
 
If you are interested please apply now! Alternatively you can email your CV to mgibbs@encore-engineering.co.uk or call 0115 959 6938 and ask for Mollie.